Oracle SG-XPCIESAS-R-INT-Z, Руководство по установке

Страница: 59 / 148

45
C H A P T E R
6
Installing the Solaris OS on a SPARC
System
If you chose to create a bootable array on a SPARC system as part of your
installation (see
“Creating a Bootable Array on a SPARC System” on page 33 ), you
can install the Solaris 10/08 (s10u6) operating system (OS), at minimum, on that
bootable array. Starting with the Solaris 10/08 OS, the driver required by the HBA is
provided with the Solaris OS.
Note – If you are using an x64 system and you chose to create a bootable array as
part of your installation ( “Creating a Bootable Array on an x64 System” on page 27 ),
DO NOT perform any steps in this chapter. Instead, skip to “Installing an OS Onto a
Bootable Array on an x64 System” on page 39 .
This chapter contains the following sections:
■
“Preparing to Install the Solaris OS” on page 46
■
“Installing the Solaris OS” on page 46
■
“Next Steps” on page 47