Table 3-4 Figure Legend
Number
Description
1
CMA slide-rail connector
2
Right slide-rail
6.
Insert the left CMA slide-rail connector into the left slide-rail assembly until the
connector locks into place with an audible click, as shown in
Figure 3-11 Inserting CMA Slide-Rail Connector Into the Back of the Left
Slide-Rail
Table 3-5 Figure Legend
Number
Description
1
CMA slide-rail connector
2
Left slide-rail
7.
Install and route cables to your Oracle Exalytics In-Memory Machine, as required.
8.
If required, attach the cable hook and loop straps to the CMA, and press them into
place to secure the cables, as shown in
Note:
Cable hooks and loop straps are preinstalled on the CMA. Perform the
procedure in this step if you need to reinstall cable hooks and straps on
the CMA.
Chapter 3
Installing the Cable Management Arm
3-10