Oracle Exalytics In-Memory Machine, Руководство пользователя

Страница: 35 / 85

Figure 3-12 Installing CMA Cable Straps
Table 3-6 Figure Legend
Number Description
1 CMA cable strap
2 CMA arm
3.9 Verifying the Operation of the Slide Rails and CMA
Use the following procedure to ensure that the slide-rails and CMA are operating
correctly.
Note:
Two persons are recommended for this procedure: one to move the Oracle
Exalytics In-Memory Machine in and out of the rack, and one to observe the
cables and CMA.
1.
Slowly pull the Oracle Exalytics In-Memory Machine out of the rack until the slide-
rails reach their stops.
2.
Inspect the attached cables for any binding or kinks.
3.
Verify that the CMA extends fully from the slide-rails.
4.
Push the Oracle Exalytics In-Memory Machine back into the rack, as described in
the following sub-steps.
When the Oracle Exalytics In-Memory Machine is fully extended, you must release
two sets of slide-rail stops to return the Oracle Exalytics In-Memory Machine to the
rack:
• The first set of stops are levers, located on the inside of each slide-rail, just
behind the back panel of the Oracle Exalytics In-Memory Machine. Push in
both green levers simultaneously and slide the Oracle Exalytics In-Memory
Machine toward the rack. The Oracle Exalytics In-Memory Machine will slide in
Chapter 3
Verifying the Operation of the Slide Rails and CMA
3-11