Oracle Database Appliance X6-2-HA, Руководство по развертыванию и инструкция пользователя

Страница: 85 / 473

5.
On the Network Information page, provide your domain name, DNS server
addresses, public and VIP addresses for your two nodes, SCAN name and
addresses, and netmask and Gateway addresses. Click Next.
As you enter data on this page, some fields are automatically filled with values
derived from earlier entries. For example, if the address that you provide for the
Node 0 public IP address is 192.0.2.18, then the default node addresses generate
as follows:
• Node 0 public IP address: 192.0.2.18
• Node 1 public IP address: 192.0.2.19
• Node 0 virtual IP (VIP) address: 192.0.2.20
• Node 1 virtual IP (VIP) address: 192.0.2.21
• SCAN addresses (two addresses resolving to the SCAN VIP name):
192.0.2.22, 192.0.2.23
6.
(Optional) On the Database Information page, determine if you want to create an
initial database.
• If you do not want to configure an initial database, then click Next. Go to Step
7.
• If you want to configure an initial database, select the check box for Create
Initial Database, complete the fields, then click Next.
To configure an initial database, provide the following database details:
• Database Name. Enter a name for the database.
• Is Container Database. The default is false. If you leave the default value,
then the Configurator builds a non-container database.
Chapter 5
Creating a Configuration File for a Virtualized Platform
5-15