CAUTION
NOTE
Before beginning this step, very carefully seat the aluminium
top cover above the compact disc in its specially machined
recess and position, so that the two finger slots match the one on
the player main chassis. The slightly curved section of the finger
slots should be facing the front of the unit. This will give a more
accurate operational mass of the main chassis.
Do not attempt to lift the main chassis from the suspension
towers as this could damage the connecting cable between
the display module and the main chassis. If the main chassis needs to
be removed, a special technical document is available from
Agence
Commerciale A.C.I. Inc.
or your local area distributor. This work should
always be carried out by an experienced and competent technician.
• Place your Oracle CD player on a flat surface to complete the set up procedure.
Suspension Fine Tuning
The suspension of your Oracle CD turntable has been calibrated at the factory
but it
possibly
might require minor fine-tuning before putting the player into
service. To help with this we have supplied
a suspension calibration tool
to
assist with accurate measurement and calibration of each suspension tower.
NOTE
The reference to clockwise or counter-clockwise is
determined by viewing the spring module from above.
Suspension Fine Tuning
The tool supplied will help you determine if a suspension
fine tuning is required. If no or only minor changes
need to be performed, you might select
to leave the system as is.
At this point, the suspension top covers
can be installed and the player moved to
its final playing location.
To complete the final leveling of the
plinth, it will be necessary to use a spirit
level. The leveling will be achieved by
ajusting the height of the threaded feet
under the plinth.
This picture indicates the
target setting
of the suspension system.
4
Содержание CD turntable
Страница 1: ......
