Oracle Audio CD turntable, Руководство пользователя

Страница: 12 / 20

Disc Reset Down (-) Up (+) Play Stop
Track Selector
Display Keyboard Function Selector
Please Follow these Important Safety Tips for
The Safe Operation of Your CD Player
Safe Operating Instructions
These instructions may seem extremely basic, but they must be
followed exactly to ensure safe operation of this product.
1. Before switching on your CD Player/Drive it is essential that the aluminium
top cover be correctly installed and remain in place until the CD display indi-
cates the «␣
No Disc
␣ » message.
2. To start playing a CD : remove the aluminium top cover ; select the CD you
wish to play and place it on the CD turntable. Install the magnetic clamp and
replace the top cover.
3. Press the
Reset
button and wait for the disc information to appear in the
main CD display. The information will show the number of tracks on the CD
and the total playing time.
4. Press «
Play
» and adjust the volume control on your pre-amplifier,
sit back, and
ENJOY PURE MUSIC !
5. To change a CD, press
Stop
, the CD display will once again show the disc
information. Remove the aluminium top cover, lift your CD using one of the
methods described earlier. Gently peel the clamp from the CD. Select your
next CD and place it on the CD turntable as described above. Having placed
the disc on the turntable, the display will still show the details of the previ-
ous CD played until you press the
Reset
button, only then will the new disc
information be displayed.
Do not activate this switch until you have read the instructions listed below.
NOTE
The main Power On/Off switch for your CD Player/Drive is located on the rear of
the power supply.
10
The display module
is equipped with five
selector buttons