WRANGLER JK/JKU
3
HD Rear Bumper - Kit 83208-83268
a.
Position
Kit
nut plate
inside both pass and dvr
frame rail so that nuts line up with holes as
shown.
OE Frame Rail
Nut Plate
Align
Nut
Plate
with
frame holes
b.
Position
kit
bumper
on vehicle. Secure
bumper
to frame rail on both sides using
kit
,
10m-1.5x40
bolts & washers,
for forward two holes and
kit
1/2” x 1-1/2” bolts & 1/2” washers
through
nut
plate
inside frame rail. Do not tighten at this
time.
1/2” x 1-1/2” bolts &
washers
10m -1.5x40 bolts
& washers
c.
Install two
kit
bolts (3/8-16x1)
through bumper
center plate and into
kit
anchor bracket
..
Bumper
Anchor Bolts
d.
Insure bumper is centered and level. Tighten
down all hardware at this time.
Engine Compartment
1.
Connect both battery cables. Connect positive cable
first, then negative cable.
Positive Cable
Negative Cable
WRANGLER JK/JKU
3
HD Rear Bumper - Kit 83208-83268
a.
Position
Kit
nut plate
inside both pass and dvr
frame rail so that nuts line up with holes as
shown.
OE Frame Rail
Nut Plate
Align
Nut
Plate
with
frame holes
b.
Position
kit
bumper
on vehicle. Secure
bumper
to frame rail on both sides using
kit
,
10m-1.5x40
bolts & washers,
for forward two holes and
kit
1/2” x 1-1/2” bolts & 1/2” washers
through
nut
plate
inside frame rail. Do not tighten at this
time.
1/2” x 1-1/2” bolts &
washers
10m -1.5x40 bolts
& washers
c.
Install two
kit
bolts (3/8-16x1)
through bumper
center plate and into
kit
anchor bracket
..
Bumper
Anchor Bolts
d.
Insure bumper is centered and level. Tighten
down all hardware at this time.
Engine Compartment
1.
Connect both battery cables. Connect positive cable
first, then negative cable.
Positive Cable
Negative Cable
421 MAIN STREET, RIVERSIDE CA, 92501 | UNITED STATES | (951)-680-9595 |
WWW.ORFAB.COM
