WRANGLER JK/JKU
2
Rock Slider Rear Bumper w/LED Lamps - Kit 83218
Rear Bumper
1.
Remove Factory Bumper
a.
Remove two bolts from brackets on back side of
bumper.
Bumper
Bolt
Muffler
Bracket
b.
Remove two bolts from each bumper bracket at
frame and remove bumper.
Bumper
Bracket
Bolts at
Frame
c. 2012+ Models
: Remove Dvr Rear Tow Hook
INSTALL REAR BUMPER
1.
Rear Bumper
Kit
Anchor Plate
a.
Remove two center 12mm bolts from factory
hitch mount or tow hook and replace bolts with
two
kit
bolts (12m-1.5x120mm)
and two
kit
washers (12m).
.
Frame
Bolts at
Frame
b.
Install
kit
anchor bracket
with two
kit
flange
nuts (12m-1.5)
. Center
kit
anchor bracket
flush
with the mounting surface and tighten down
kit
flange nuts
..
Frame
Anchor Bracket
NOTE:
2012+ year models with relocated dvr rear tow
hook & no rear hitch will require you to use two
kit
spacers
in-between rear frame crossmember and
kit
anchor bracket.
421 MAIN STREET, RIVERSIDE CA, 92501 | UNITED STATES | (951)-680-9595 |
WWW.ORFAB.COM
