Section 4 Operation and Troubleshooting
This section shows how to operate and troubleshoot the Wireless Modem.
Figure 4-1 DIP-Switches
4.1 Hardware Setup
1. Set both Radio DIP switches to RS-232 mode: (Switch #1, #5, #6 up [ON] and the remaining switches
are down [OFF]).
2. Connect Radio 1 to a PC using an RS-232 cable (included with Wireless Modem part numbers that
end with an “-RA” suffix)
3. Attach the serial loopback adapter (red connector) to the DB-9 serial port of Radio 2. [The serial
loopback adapter configures Radio 2 to function as a repeater by looping data back into the module for
transmission.]
4. Attach RPSMA antennas to Radio 1 and Radio 2.
5. Power Radio 1 and Radio 2 through their power connectors.
Figure 4-2 Range Test Cable Setup
6. Use the
Discover
button to find the Radio Modules connected to your PC.
Doc. No.: M00-20-7074 Rev.: 6
Page 30 of 43
Содержание M00-20-7074
