background image

 

71SO Overfill Prevention Valves and 

71SO Testable Overfill Prevention Valves 

Installation and Maintenance Instructions 

IMPORTANT INFORMATION 

FOLLOW ALL INSTRUCTIONS 

Please read these warnings and use and assembly 
instructions completely and carefully before start-
ing.  Failure to do so may cause product failure, or 
result in environmental contamination due to liquid 
leakage into the soil, creating hazardous spill condi-
tions. 

OPW Standard Product Warranty Tag:  

Notice: Flex-

Works by OPW, Inc., VAPORSAVER™ and all other OPW 
products must be used in compliance with all applica-
ble federal, state, provincial and local laws, rules and 
regulations. Product selection is the sole responsibility 
of the customer and/or its agents and must be based 
on physical specifications and limitations, compatibil-
ity with the environment and material to be handled. 
All illustrations and specifications in this literature are 
based on the latest production information available 
at the time of publication. Prices, materials and speci-
fications are subject to change at any time, and mod-
els may be discontinued at any time, in either case, 
without notice or obligation. 

OPW warrants solely to its customer (the initial pur-
chaser and any subsequent purchasers within the 
warranty period) that the following products sold by 
OPW will be free from defects in materials and work-
manship under normal use and conditions for the pe-
riods indicated: 

OPW’s exclusive obligation under this limited warran-
ty is, at its option, to repair, replace or issue credit (in 
an amount not to exceed the list price for the product) 
for future orders for any product that may prove de-
fective within the applicable warranty period. (Parts 
repaired or replaced under warranty are subject to 
prorated warranty coverage for remainder of the orig-
inal warranty period).  Complete and proper warranty 
claim documentation and proof of purchase required.  
All warranty claims must be made in writing and deliv-
ered during the applicable warranty period to OPW at 
OPW 9393 Princeton-Glendale Road Hamilton, Ohio, 
USA 45011, Attention: Customer Service Manager.  No 
products may be returned to OPW without its prior 
written authority. 

This limited warranty shall not apply to any FlexWorks 
or VAPORSAVER™ product unless it is installed by an 
OPW attested installer and all required site and warran-
ty registration forms are completed and received by 
OPW within 60 days of installation.  This limited warran-
ty also shall not apply to any FlexWorks, VAPORSAVER™ 
or other OPW product: unless all piping connections are 
installed with a nationally-recognized or state-
approved leak detection device in each tank and dis-
penser sump (which are not for storage and from which 
all discharge hydrocarbons must be removed, and the 
systems completely cleaned, within 24 hours); unless 
testable sumps utilize FlexWorks pipe and access fit-
tings; unless a sump inspection log or an EPA recom-
mended/required checklist is maintained and the re-
sults are furnished to OPW upon request; and unless 
OPW is notified within 24 hours of any known or sus-
pected product failure and is provided with unrestrict-
ed access to the product and the site. This limited war-
ranty also shall not apply to any product which has 
been altered in any way, which has been repaired by 
anyone other than a service representative authorized 
by OPW, or when failure or defect is due to:  improper 
installation or maintenance (including, without limita-
tion, failure to follow FlexWorks Quick Reference Manu-
al Installation Guide and all product warning labels); 
abuse or misuse; violation of health or safety require-
ments; use of another manufacturer’s, or otherwise un-

PRODUCT 

WARRANTY PERIOD 

FlexWorks Primary Pipe 

10 years from date of manufacture 

All Products and re-

placement parts in-

stalled in the State of 

California 

Certified to California CP

-201 and/or CP-206 

Standards* 

1 year from date of installation (proof of 

purchase from certified contractors/

technicians required) 

OPW warrants ongoing compliance with 

the standards and specifications for the 

duration of the warranty period required 

by the State of California; this limited war-

ranty is under the condition the equip-

ment was installed and maintained by 

trained and certified contractors/

technicians unless noted in Installation 

Manual. 

All other Products and 

replacement parts 

1 year from date of manufacture** 

*Products certified to California CP-201 and/or CP-206 Standards 

have been factory tested and met all applicable performance stand-

ards and specifications and will have an OPW registration card en-

closed/attached to the product. 

Содержание 71SO-TOOL


























Отзывы: