Opvimus UMX-2SA, Руководство по эксплуатации

Страница: 6 / 19

UMX-2SA version 3.2.000 6
Card with two audio outputs
with surveillance functions
UMX-2SA
CHANNEL “A” CHANNEL “B”
CHANNEL “A”
FAIL CONTACT
*OPEN
COLLECTOR
SW1
DIP switch 1 = ON
DIP switch 2 = OFF
JP2 ON
VOLTAGE
FREE
SW1
DIP switch 1 = OFF
DIP switch 2 = ON
JP2 OFF
CHANNEL “A”
PRIORITY
CONTACT
*OPEN
COLLECTOR
SW1
DIP switch 3 = OFF
DIP switch 4 = ON
JP3 ON
VOLTAGE
FREE
SW1
DIP switch 3 = ON
DIP switch 4 = OFF
JP3 OFF
JP5 OFF
CHANNEL “B”
FAIL CONTACT
*OPEN
COLLECTOR
SW2
DIP switch 1 = ON
DIP switch 2 = OFF
JP4 ON
VOLTAGE
FREE
SW2
DIP switch 1 = OFF
DIP switch 2 = ON
JP4 OFF
CHANNEL “B”
PRIORITY
CONTACT
*OPEN
COLLECTOR
SW2
DIP switch 3 = OFF
DIP switch 4 = ON
JP1 ON
VOLTAGE
FREE
SW2
DIP switch 3 = ON
DIP switch 4 = OFF
JP1 OFF
JP6 OFF
4. INSERTING THE CARD
The card occupies one slot on the matrix and may be inserted in slots 3 to 10 of the COMPACT matrix or in any of the COMPACT-E
slave matrix slots.
To insert the card proceed as follows:
1)
Disconnect the power supply to the unit (POWER SUPPLY 1 and POWER SUPPLY 2 strips).
2) Remove the rear blank plate for the slot where the card is to be inserted. The cards occupy a slot.
3) Insert the card by fitting it into the slot guides and fasten it by means of the fastening screws.
4) Reconnect the power.
* Factory settings * Factory settings
Figure 5