Opvimus UMX-2SA, Руководство по эксплуатации

Страница: 5 / 19

UMX-2SA version 3.2.000 5
Card with two audio outputs
with surveillance functions
UMX-2SA
8) CHANNEL “B”. Set of elements belonging to channel B. They have the same functionalities as the elements of channel A,
applied in this case to channel B (with the exception of the connection of Pin 8 to ground and the shield of connector RJ45 B,
which is accomplished by internal jumper JP1).
3. CONFIGURATION
JP1
Connection to ground
(GND) of pin 8 and the
shield of connector RJ45
for CHANNEL “B”
Connection to ground (GND)
of pin 8 and the shield of
connector RJ45 for CHANNEL “A”
JP3
Configuration of the
FAIL and priority
contact for channel B
SW2 and JP4
Figure 2
SW1 and JP2
Configuration of the
FAIL and priority
contact for channel A
JP6
Connection to earth
of the equipment
of pin 8 and the shield
of connector RJ45
for CHANNEL “B”
JP5
Connection to earth
of the equipment
of pin 8 and the shield
of connector RJ45
for CHANNEL “A”
Figure 4
RJ45 CONECTOR
PRIORITY CONTACT SCHEME
Voltage free contact
* Open collector output
Figure 3
FAIL CONTACT
SCHEME
Voltage free contact
* Open collector output
*
Factory settings