User’s guide CS 2418 CD
Operation:
•
Machine should be placed on sturdy and level surface.
•
Before plugging in the machine, ensure that the main switch is in “0” position.
•
Set the main switch in „I” position
→
stand-by light turns on.
•
Insert paper into the feed opening. NOTE! Paper should be put in the middle of the slot. The machine starts
automatically after inserting the paper. Max paper width is 230mm. If the pages are wider, cut or fold them to
smaller format. Shredder capacity is 18 sheets of 80 g/m² paper.
•
The machine shreds also Plastic cards, CDs and floppy disco – there are special slot for these materials. Max shredder
capacity is 1 CD, 1 plastic cards or 1 floppy disc. Do not shred paper and CDs (plastic cards, floppy discs) at one time.
Do not insert CD, cards and floppy discs into the feed opening and paper into the slot for CDs, cards and floppy discs.
•
Set the main switch in „0” position when shredding is finished
•
If too many pages of paper is inserted into the slot, it may cause paper jam inside the cutting blades. Pull out stuck
paper and press “FWD” switch to shred paper scraps or press “REV” switch to remove stuck paper from the slot. If it will
not solve the problem, contact service team
Cleaning:
Before clearing the shredder ensure that the main switch is set in “0” position and the machine is unplugged from the
mains socket.
When the shred bin is overfilled, it may cause problems with putting paper into the feed opening. Pull the bin out,
remove shreds and install the basket in the shredder.
Cleaning of the housing – wipe the cover of the shredder with gentile detergent or wet piece of clothing. Do not put
machine into the water. Do not wipe the unit with benzene, alcohol or solvents
→
they can cause durable cover
damage
Maintenance:
