User’s guide CS 2418 CD
•
Before maintaining the shredder, ensure that the machine is unplugged from the mains socket
•
To prevent reduction of efficiency and increase of sound level as well as to prolong machine lifespan, it is
necessary to oil cutting blades regularly.
•
After filling the waste bin for several times., the blades should be greased with special oil (provided by OPUS). Put
the oil on few pieces of paper and shred them so that the oil was spread on the whole cutting mechanism
Possible malfunctions:
Malfunction
Cause
Remedy
Equipment does
not start after
inserting paper into
the slot
1. Shredder is not plug in properly
2. Pages to be shred are too soft
3. Overheating
4. Paper jam
5. The basket is not fitted properly
1. Plug the equipment in correctly
2. Fold pages or insert more paper in the feed
opening
3. Turn off the shredder, wait about 30 minutes
Turn on once again
4. Remove stuck paper
5. Install shred bin correctly
Equipment does not
stop after shredding
Photo cell in the entry slot is
covered by scraps of paper
Clean the photo cell
The shredder
operates too loud
Equipment is not on sturdy and
level floor
Place the machine on study and level surface
and lock front wheels
The shredder does
not operate
correctly
1. Too many pages inserted into the
feed opening
2. Too big a paper format
3. Paper is not inserted in the centre
of feed opening
1. Reduce number of pages inserted to the slot at
one time
2. Switch to REV button to remove paper and insert
folded pages once again
3. Insert paper in the middle of the feed opening
Technical Data:
Shredder type:
cross-cut
Feed opening:
240mm / 122 mm
Performance:
18* / 1 CD / 1 credit card
Shred size:
4x40 mm
Waste bin:
27l
Voltage:
220-240 Volt AC at 50 Hz
Power:
370 W
Input current fuse:
1,6 A
Net weight:
19 kg
Dimensions (H x W x D):
640 x 375 x 275 mm
*paper 80g/m²
09.08.2012
