Installation and operating instructions
JÄGER DIREKT · Opus Straße 1 · 64646 Heppenheim · [email protected] · www.myOPUS.eu
NOTE
A partial or complete reset to the as-delivered state should only be carried out in justifi ed exceptional cases!
• All teach-in devices are deleted and the teach-in relationships to them are lost.
• All confi gurable parameters of the OPUS BRiDGE switch are reset to their default values and the following basic settings apply:
- right series rocker controls roller shutter or louvre
- left series rocker operates as wall transmitter
- movement time 120 s, rotation time 2 s
- louvre operation
- central functions deactivated
- EnOcean repeater and routing deactivated.
• OPUS BRiDGE must be completely reintegrated into an existing smart home environment. For this purpose, the OPUS Confi gTool may be required,
for example, to establish direct teach-in relationships with wall transmitters and smoke detectors.
6.
Supported profi les
In the OPUS BRiDGE Roller Shutter and Louvre switch, teach-in of wall transmitters and sensors with the EnOcean profi les listed below is possible.
Up to 14 sensors and wall transmitter rockers are supported; when it comes to wall transmitters, the individual rocker counts.
EEP
Description of EnOcean Equipment Profi le (EEP)
F6-02-01
Rocker switch with 2 rockers for light control type 1, unidirectional
F6-03-01
Rocker switch with 4 rockers for light control type 1, unidirectional
F6-05-00
Wind alarm, unidirectional
F6-05-02
Smoke detector, unidirectional
F6-10-00
Window and door handle, unidirectional
D5-00-01
Window and door contact, unidirectional
The following EEP allows teach-in of OPUS BRiDGE Roller Shutter and Louvre is possible in Smart Home systems from a wide range of manufacturers.
Up to two Smart Home systems are supported in parallel. The vertical travel time and, in the case of a louvre, the rotation time must be confi gured
individually!
EEP
Description of EnOcean Equipment Profi le (EEP)
D2-05-02
Roller Shutter and Louvre control for position and tilt position, bidirectional
1-channel motor switch with local operation
7. Conformity
7.1 WEEE directive 2012/19/EU: Waste electrical and electronic equipment
Properly dispose of electrical and electronic equipment that is no longer required; do not dispose of together with household
or residual waste. The purchaser is generally responsible for the proper and legally compliant disposal of old equipment.
7.2 CE conformity
Radio approval and EMC according to Radio Equipment Directive 2014/53/EU, electronics according to RoHS Directive 2011/65/EU.
The complete declaration of conformity is available for download at the following address: https://support.myopus.eu/
konformitaetserklaerungen.
8. Contact
JÄGER DIREKT
Jäger Fischer GmbH & Co. KG
Opus Straße 1
64646 Heppenheim, Deutschland
For further information, please visit: http:\\support.myOPUS.eu