5
Read Instructions -
All the safety and operating instructions should be read before the product is
operated.
Retain Instructions
- The safety and operating instructions should be retained for future reference.
Heed Warnings
- All warnings on the product and the operating instructions should be adhered to.
Follow Instructions
- All operating and use instructions should be followed.
Cleaning
- Unplug all system components from the wall outlet before cleaning any part of the system. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments
- Do not use attachments which are not recommended by Opus Technologies as they may
cause hazards.
Water and Moisture
- Do not use this product near water - for example, near a bath tub, wash bowl or
kitchen sink; in a wet basement, or near a swimming pool etc.
Wall or Ceiling Mounting
- Speakers should be mounted to a wall or ceiling only as recommended by
the manufacturer. Installers should also ensure that all building regulations are strictly adhered to as cutting
a hole for a loudspeaker may affect the fire rating of a ceiling or wall.
Accessories
- Do not place this product on an unstable surface, stand, bracket or table. The product may
fall, causing serious injury to child or adult, and serious damage to the product. Use only a surface,
stand bracket or table recommended by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer's instructions, and should use a mounting accessory
recommended by the manufacturer. A product and stand combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the combination to overturn.
Ventilation
- Slots and openings in the cabinets/enclosures are provided for ventilation and to ensure
reliable operation of the product and to protect them from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the product on a soft surface. The MCU
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided
and the manufacturer's instructions have been adhered to. For all components, the manufacturers
instructions on ventilation must be adhered to.
Power Sources
- This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power or other sources, refer to the
operating instructions. This apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
Grounding or Polarization
- Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Power-Cord Protection
- Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product. The mains plug is used as the
disconnect device and shall remain readily operable.
Protective Attachment Plug
- The product is equipped with an attachment plug having overload
protection. This is a safety feature. If replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the same overload protection as the original
plug.
Lightning
- For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line surges.
Overloading
- Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
Object and Liquid Entry
- Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
Servicing
- Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to an authorised service agent.
Lithium Battery
- This product is equipped with a lithium battery that is NOT to be replaced by the user.
CAUTION - Danger of explosion if battery is incorrectly replaced. To be replaced only with the same or
equivalent type by qualified service personnel.
Damage Requiring Service
- Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen onto the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance - this indicates a need for service.
Replacement Parts
- When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorised substitutions may result in fire, electric shock, or other hazards.
Safety Checks
- Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Heat
- The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Important safety instructions
Содержание 500 system
Страница 1: ...Opus System User Guide...
