6
1
2
3
4
POWER BUTTON
STEP 4
START ’ER UP
1
Switch your modem on by pressing the
Power button
on the
back of the modem.
2
The
Power LED
and
Ethernet LED
will light up. The LED labelled
DSL
will blink during installation then after a couple of minutes
will remain a steady green and the internet LED will light up.
TIP:
If the DSL LED keeps blinking your modem
is unable to establish a broadband
connection. Please check:
• The Power LED is steady green and
ensure all cables are connected
• You are installing your modem after
the activation date that we have
arranged with you
• Remove all other phone equipment or
test modem on a different wall socket.
STEP 5
YOUR SETTINGS
1
Open your internet browser and ignore any error messages
that may appear (e.g. Internet Explorer, Firefox, or Safari) and
type
10.1.1.1
in the address field of the browser.
2
Replace the default email address (john_citizen@optusnet.
com.au) and password with your personal email and password
as provided in your Welcome letter and click apply. The
modem will now connect to the internet – this may take a few
minutes.
3
Close and reopen your browser.
TIP:
If it’s the first time you are using Optus
Broadband you will be directed to
ServiceNet to activate the service.
Service Net is an online facility to confirm
the status of your account or determine
if your login details are correct.
POWER
DSL INTERNET
ETHERNET