4
STEP 1
STEP 2
CHECK THESE
THINGS FIRST
CONNECT THE
FILTERS AND
TELEPHONE
1
To install the filter connect the side labelled
Wall Socket
to
the telephone wall socket.
2
If you have a different wall socket (600 series as pictured)
you’ll need to use an adaptor (605 to RJ11). These can be
purchased from any electronics store.
3
Remove the sticker covering the rear ports.
4
Connect the grey telephone cable to the filter port labelled
Modem
and the grey port on the modem.
5
Connect your telephone to the port on the filter labelled
Phone
.
Please install your modem after your Optus service activation
date and ensure you have the following items before installation:
• Your Welcome letter with your username and password
• Filter (x2)
• Grey telephone cable
• Netgear ADSL WiFi Modem Router
• Yellow Ethernet cable
• Modem power cable
TIP:
If you have a back-to-base alarm, ensure
you have a central filter installed.
TIP:
To add additional telephone devices that
share the same telephone number as
your Optus DSL Broadband service
(for example: telephones, fax machines,
dial-up modems, answering machines
and some digital pay TV equipment),
you’ll need to use an additional filter
and install them as described for the
telephone above.
WALL
SOCKET
MODEM PHONE
600 SERIES SOCKET
LET’S GET STARTED