Optronis CamPerform C-72, Руководство пользователя

Страница: 14 / 39

CP80-25-M/C-72 Ref. 1889-SU-01-D Page 12
Indicator Lamp (LED)
State Indication
No power Off
System booting Solid orange
Powered, but nothing connected
(only for power over power connector)
Slow pulse red
Link detection in progress,
PoCXP active
Fast flash green
Linkt detection in progress,
PoCXP not in use
Fast flash orange
Camera / Grabber incompatible,
PoCXP active
Slow flash alternate red / green
Camera / Grabber incompatible,
PoCXP not in use
Slow flash alternate red / orange
Camera connected, but no data being
transferred Slow pulse green
Camera connected, waiting for event
(e.g. trigger, exposure pulse) Slow pulse orange
Camera connected, transferring
frames Solid green
Error during data transfer 500ms red pulse
System error Fast flash red
Camera is in calibration mode, when all LEDs are flashing slowly.
Calibration mode is directly after startup and can last about 10 seconds.
CoaxPress Data Channels
To operate the camera, all 4 CoaxPress Channels (Labeling: BNC 4x) have to
be used. Channel 1 is Master link. Channel 2, Channel 3 and Channel 4 are
Extension links. Channel 1 uses Power over CoaxPress (PoCXP). Speeds of
the Downlink are 6,25Gbit/s, 5,00Gbit/s or 3,125Gbit/s depending on the speed
transfer capabilities of the frame grabber.