optris CTratio 1M Series, Руководство оператора

Страница: 31 / 56

Outputs and Inputs
31
-
5.3 Programming Interface
The CTratio has on the side of the electronic box a
USB interface for programming and running the
sensor. The USB cable is included in the scope of
supply. As an option, the device can also be
equipped with an RS232 or RS485 interface.
If you want to install the optionally available interfaces, plug the interface board into the place provided,
which is located beside the display. In the correct position the holes of the interface match with the thread
holes of the electronic box. Now press the board down to connect it and use both M3x5 screws for fixing it.
Plug the preassembled interface cable with the terminal block into the male connector of the interface board.
When using the current outputs, an external power supply (8-30 V) is recommended, since the
maximum power consumption is 5 W.