optris CSmicro 2W2M Series, Руководство оператора

Страница: 19 / 45

CF Lens and Protective Window
If the CF lens is used, the
transmission has to be set to
0,78
[LT/ 2WLT].
The optional CF lens allows the measurement of very small objects.
The minimum spot size depends on the used sensing head. The
distance is always measured from the front edge of the CF lens
holder or laminar air purge collar. The installation on the sensing
head will be done by turning the CF lens until end stop. To combine it with the 2WhsLT model please use the
version with external thread M12x1.
Versions Overview:
ACCTCF CF lens for installation on sensing head [LT/ 2WLT]
ACCTCFHT CF lens for installation on sensing head [2W2M]
ACCTCFE CF lens with external thread for installation in massive housing [LT/ 2WLT]
ACCTCFHTE CF lens with external thread for installation in massive housing [2W2M]
For protection of the sensing head optics a protective window is available. The mechanical dimensions are
equal to the CF lens. It is available in the following versions:
ACCTPW Protective window for installation on sensing head [LT/ 2WLT]
ACCTPWHT Protective window for installation on sensing head [2W2M]
ACCTPWE Protective window with external thread for installation in massive housing [LT/ 2WLT]
ACCTPWHTE Protective window with external thread for installation in massive housing [2W2M]
If the protective window is used, the
transmission has to be set to
0,83 [LT/
2WLT] or 0,93 [2W2M].
optris CSmicro – E2011-08-B
17