OPTON PTA5102Y-16, Руководство пользователя, Страница: 6 / 10

Control Front Panel Display and Alarms
Outline the menu of High Power Optical Amplifier. For the description of all instructions, please
refer to the panel shown below. Through the buttons on the right side of the LCD screen, you can
scroll through all the menus of the large light.
1.
Panel Menus and Operations
1. Boot Sequence
A. Plug in the power cord
B. Turn on the rear panel power switch. The first line of the front panel displays “The
Machine Model” and the second line displays “PTAXXXX-XX-XX”.
C. Press the “up” menu switch button to switch the menu to the laser switch status
menu. That is, the first line of the menu displays “Laser Key State” and the second line
displays the position of “OFF”. Press the “Enter” button and then press the “ESC”
button. At this time, the second line on the front panel displays “Set: OFF”. Then press
the “up” key or the “Down” key to set the switch to the open state, “Set: ON”. Finally,
press the “ESC” key to save and exit the setting. Now, the second line of the front
panel displays “ON” to indicate that the switch is on, and the LED corresponding to
OUT changes from red to green.
2 .Launch the Main Menu
Press the “up” button to scroll up the menu and press the “up” button to display the
following main menus in sequence.
Menu #1 - Descriptor
Equipment Model