Optoma W9PD7JF01VZ1, Руководство пользователя

Страница: 44 / 77

44 English
USING THE PROJECTOR
Setup HDMI link settings menu
Note:
• When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power off status using the HDMI Link control feature in the projector’s OSD. This
lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical con-
figuration, your DVD player may be connected to the projector through an amplifier or home theater system.
HDMI
HDMI
Amplifier DVD Player
HDMI Link
Enable/disable the HDMI Link function. The inclusive TV, power on link, and power off link options will only
available if the setting is set to “On”.
Inclusive of TV
Set to “Yes” if you prefer both TV and projector to be automatically turned off at the same time. To prevent both
devices to be turned off at the same time, set the setting to “No”.
Power On Link
CEC power on command.
• Mutual : Both projector and CEC device will be turned on simultaneously.
• PJ

Device : The CEC device will be turned on only after the projector is switched on.
• Device

PJ : The projector will be switched on only after the CEC device is turned on.
Power Off Link
Enable this function to let both HDMI Link and projector to be automatically turned off at the same time.
Setup test pattern menu
Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off).
Setup remote settings menu
IR Function
Set the IR function setting.
• On : Choose “On”, the projector can be operated by the remote control from the top and front IR receivers.
• Off : Choose “Off”, the projector can’t be operated by the remote control. By selecting “Off”, you will be able
to use the Keypad keys.
Remote Code
Set the remote custom code by pressing the remote ID button for 3 seconds and you will notice the remote indicator
(above the Off button) starts blinking. Then, input a number between 00-99 using the keyboard numbered keys.
After inserting the number, the remote indicator blinks twice quickly indicating that the remote code has changed.