Optoma ThemeScene HD3000, Руководство пользователя

Страница: 14 / 126

14
Connections
and
Setup
Connecting the Projecto r to Other Devices
Before Setting Up
Note
• Before connecting, turn off both the projector and the devices to be connected. After making all
connections, turn on the projector first and then the other devices.
When connecting a computer, be sure that the comp
uter is the last device turned on, after all
connections are made.
• Read the operation manuals of the devices to be connected before making connections.
This projector can be connected to
Video equipment:
A VCR, Laser disc player or other video equipment.
A DVD player or DTV* decoder.
*DTV is the umbrella term used to describe the new digital television system.
A computer, using:
A HD 15-pin VGA to HD 15-pin VGA cable (sold separately), or
A DVI-D to DVI-D cable (sold separately), or
An RS-232C cable.
Connecting the Power Cord
Plug the supplied power cord into the AC
socket on the rear of the projector.
Supplied
accessory
Power cord
S-VIDE
O
VIDEO
Pr/Cr
Pb/Cb
Y
Pr/Cr
Pb/Cb
Y
PC
DVI
WARNING
v Do not disas
semble any
components
excep
t the
lamp
chassis
cove
r while replacing
the lam
p.
v
Do not touch
ventilation
slots,
lamp
and objects next t
o them
until
they
have
sufficiently cooled
down
.
v Never inser
t any
objec
ts through vent
ilation
holes
.
v Do not
use
this unit ne
ar water
or in a rainy/moist
environment
.
v
Keep
at least 0.3
foot
(10 cm)
of space
between
ventilation
slots and
nearest o
bject
or wall.
Made in
Taiwa
n
RS-232