LTDVE8CH– INSTRUCTIONS MANUAL
25
13. Wiring diagrams
As discussed in the previous sections, the controller is quite flexible and many configurations can be
achieved. The following wiring diagrams describe some of the most common.
13.1. Wiring example #1: controller triggers camera
In the schematic diagram of
Figure 10
: example schematic #1
the controller is driven by two input
triggers, powers a total of three lights and triggers two cameras.
Figure 10: example schematic #1
As shown, the power and logic supplies are derived from a common power supply.
If required for the application, a safety switch may be included in the circuit to cut off supply to the
power stages in order to protect the end user from photo-biological hazard. That switch would be
appropriately placed on the machine chassis.
Cameras 1 and 2 are triggered by the controller using two of the eight available synchronization
outputs. Generally, it is not possible to provide the details of the connections to the cameras because
these are often vendor specific. Please see the camera hardware manual for more information.
13.2. Wiring example #2: camera triggers controller
In the schematic diagram of
Figure 11
: example schematic #2
the controller is driven by one input
trigger coming from a camera, powers a total of two lights and triggers a second camera.
