www.optoedu.com Page 7 of 14 [email protected]
(3) Output connector (Coaxial 5.5x2.1mm plug)
Note:
Non-professional maintenance staffs do not open the power supply adapter.
4.5 The description of other parts is as follows (see Figure 1):
a. Beamsplitter 11 (optional): It is used to divide the light. It is
provided with connections at left and right side for the connection of
video camera adapter and demonstrator or SLR camera adapter etc.
(1) Connector for video camera adapter, demonstrator or photo
adapter
(2) Locking screw
b. Video camera adapter 13 (optional): It is a component connected
to the beamsplitter for optical image forming. It is suitable
connected to video camera, which connector is 1/3 inches “C” or
“CS”.
1) Screw connector, which connects with video camera
(2) Connector, which connects with beamsplitter
(3) Focusing hand wheel
(4) Locking screw8
c. Demonstrator 10 (optional): It is a monocular observation unit
connected to the beamsplitter. It can be used for observation at the
same time with the binocular observation unit.
(1) Eyepiece
(2) Connector, which connects with beamsplitter
(3) Image rotating hand wheel
(4) Observation position changer
d. SLR camera adapter (optional) It is an optical image-forming
component that is connected to the beamsplitter. It is connected to
a SLR camera or SLR digital camera with Nikon mount or Canon
mount for photo taking. Please contact with supplier.
(1) Connector, which connects with beamsplitter
(2) Connector, which connects with SLR camera
(3) Focusing handwheel
5. Installation of Instrument
5.1 Installation of floor stand with wheels
Insert the column into the hole in base and tighten threaded nut.
5.2 Installation of power supply box
Put the box on the top of the column and tighten locking handwheel
