A23.0910
www.optoedu.com
Page 13 of 14
Fig. 24
3-12
Assemble and Use the Polarizer Device
1)
Take off the worktable
②
from the base, and fix the
polarizer group
①
onto the base with a M3 sunk key
(make the flat side of polarizer group
①
close to the
pillar), then put back the worktable
②
. (See Fig. 24)
2)
Loop the analyzer group
③
on the outside diameter
of main objective
④
, and lock it with the lock screw of
analyzer group.
3)
Rotate the adjusting ring
⑤
of analyzer group
③
, to
adjust the vibrated direction of the analyzer, which is
360
°
rotatable.
