-
１
-
ATTENTIONS
1.
Purpose
This microscope is used only for microscopic observation, can not be used
for other purposes. Otherwise may cause the damage of the instrument.
2.
Disassembly only by the professionals.
The microscope has been adjusted before shipping, Unprofessional-person
should not disassemble and remove any other parts.
If you have any questions, please contact with manufacturer or local
distributor.
3.
Note the input voltage if identical with
operating voltage of instruction.
This instrument designed for wide input voltage (100V~240V,50/60HZ),
applicable to most area .But if the supply voltage exceeds this range, the
instrument will be seriously damaged.
4.
Use in safe way, prevent burns and fire.
When the Instrument power in working, temperature of bulb and
lamp house will rise sharply to meet the heat balance, so pay
attention to anti-hot logo in case of be burned.
Do not use alcohol, gasoline, paper and other combustibles near the
instrument, to prevent a fire! !
5.
Notes on replacing the bulb.
The instrument used with
12
V/20W or 6V/30W halogen lamp of G4, LED
model with 3.4V/3W, replacement should be used with same specifications of
the bulb, or may cause equipment damage.
Before replacing the lamp, must turn off power switch until bulb is cool
off, and unplug it in case of electric shock.!
6.
Requirements for handling and using environment
Please cut off the power and unplug the power plug before moving. Be
careful not to crush your finger when placed.
This instrument is a precision instrument, and it should be handle with care,
severe shock can cause serious damage to the inner related parts.
The required available environment for using of the equipment:
Indoor temperature: 0
℃
~ 40
℃
Maximum relative humidity: 85%
High temperature or high humidity may cause mildew, fog or dew of the
optical components, will result in the instrument not work.
7.
For the protection of the environment, please properly handle the
microscope packing waste (such as: cardboard, foam, etc
)
