OPTO 22 G4LC32, Руководство пользователя

Страница: 5 / 50

G4LC32 User’s Guide
WELCOME
ABOUT THIS MANUAL
This manual is organized as follows:
• Chapter 1: G4LC32 Revised Features
• Chapter 2: Introduction
• Chapter 3: Configuration
• Chapter 4: Installation
• Chapter 5: Communications and Cables
• Chapter 6: Software and Firmware
• Chapter 7: G4LC32 Hardware Specifications
DOCUMENT CONVENTIONS
• Bold typeface indicates text to be typed. Unless otherwise noted, such text may be entered in upper or
lower case. (Example: “At the DOS prompt, type cd \windows .”)
•
Italic
typeface indicates emphasis and is used for book titles.
(Example: “See the
OptoControl User’s Guide
for details.”)
• File names appear in all capital letters. (Example: “Open the file TEST1.TXT.”)
• Key names appear in small capital letters. (Example: “Press
SHIFT
.”)
• Key press combinations are indicated by plus signs between two or more key names. For example,
SHIFT
+
F
1
is the result of holding down the
SHIFT
key, then pressing and releasing the
F
1 key. Similarly,
CTRL
+
ALT
+
DELETE
is
the result of pressing and holding the
CTRL
and
ALT
keys, then pressing and releasing the
DELETE
key.
• “Press” (or “click”) means press and release when used in reference to a mouse button.
• Menu commands are sometimes referred to with the Menu
Æ
Command convention. For example,
“Select File
Æ
Run” means to select the Run command from the File menu.
• Numbered lists indicate procedures to be followed sequentially. Bulleted lists (such as this one) provide
general information.
v