Optiview OV23X Скачать руководство пользователя страница 28

Страница: 28 / 36

When there is no available command for specified time, dome automatically goes on the

previous set functions.



IDLE FUNCTION :There are two modes ON/OFF. Please use left/right key to set.



IDLE TIME: System idle period. The value ranges from 1 to 720 minutes. Please use the

left/right button on the keyboard or in the speed dome terminal menu to set.



IDLE ACTION:There are several functions you can select: NONE/PRESET/SCAN/ CRUISE

/PATTERN. Please use the left/right button on the keyboard or in the speed dome terminal

menu to set.



PRESET NO: Here is for you to set preset number. The value ranges from 1 to 255. System

goes to specified preset when idle status is on.



AUTO SCAN NO: The value ranges from 1 to 5. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set. System begins specified scan when

idle status is on.



CRUISE NO: The value ranges from 1 to 8. Please use the left/right button on the keyboard

or in the speed dome terminal menu to set. System begins specified touring when idle

status is on.



PATTERN NO:The value ranges from 1 to 5. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set. System begins specified pattern when

idle status is on.



SAVE:Move the cursor to SAVE and click confirm button to save current setup.



BACK: Go back to previous menu.



EXIT: Log out system menu.

4.2.4.7

Move the cursor to the Next Page and click OK button to see the above interface.



PTZ Speed: set dome PTZ speed. Range: 1

～

5. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set.



SET ZERO: Click

‖OK‖ button after PTZ debugged to the initial position



Power Up: actions such as

―None/Auto/Preset/Scan/Tour/Pattern‖ are optional.

Please use the left/right button on the keyboard or in the speed dome terminal menu to set.



MENU IDLE:

PTZ SPEED         :4  (1~5)
SET ZERO
POWER UP
MENU IDLE          :1M  (1M/2M/3M/4M/5M/OFF)
PTZ AUTOSTOP  :15S  (5S/10S/15S/20S/25S/30S/OFF)
BACK
EXIT

Содержание OV23X





































Результаты поиска

Содержание OV23X

Отзывы:

Бренды по названию

Популярные бренды

Optiview OV23X, Руководство пользователя

Результаты поиска

Содержание OV23X

Отзывы:

Бренды по названию

Популярные бренды