7
2
Address, Baud Rate and Parity setup
Before you operate, you need to set address, baud rate and parity. Otherwise you can not
control the product!
2.1
Address, Baud Rate and Parity Setup
Please configure the following settings before begin controlling dome:
Address
Baud rate
Parity
Note: Please reboot the speed dome to get all the setups activated!
Please note this series speed dome can automatically recognize the DH-SD, PELCO-D.
PELCO-P.
Baud rate settings
Please refer to the table below for detailed information.
1
2
Baud rate
OFF
OFF
9600bps
ON
OFF
4800bps
OFF
ON
2400bps
ON
ON
1200bps
Table 2-1
Parity settings
Please refer to the table below for detailed information.
3
4
Parity
OFF
OFF
NONE
ON
OFF
EVEN
OFF
ON
ODD
ON
ON
NONE
Table 2-2
