Optiview H.264 DVR System, Руководство пользователя, Страница: 37 / 68

DVR User
’s Manual
36
Press ENTER to start the export; or, press ESC to abort.
If there is no any exportable device connected to the DVR unit, then a
warning message will be shown on the screen, as below figure:
No exportable device detected.
Please install the target device/media
to the DVR.
Enter: Retry ESC: Exit
4.4.3 To Export Event Video
To export event video, follow these steps:
Press SEARCH and play wanted event video. To play event video, refer to
Section Searching Recorded Video .
After entering the playback mode, press COPY. The
“ezBurn” window will
display as below figure. The information shown is
“read only”.
ezBurn confirmation
Selected Device: Built-in-DVD+RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Export Event Info:
Data Time Ch Type
2008/06/07 AM10:42:35 13 Motion
Enter: YES ESC: NO
If there is no any exportable device connected to the DVR unit, a warning
message will be shown on the screen
Press ENTER to start the export the whole event video to the connected
device; or, press ESC to abort.
4.5 Dome Control
The DVR allows users to control a dome camera by the front panel.
In Live mode, users can press CHANNEL key to display the desired dome
camera in full screen. To enter Dome Control mode, press the DOME key and
press channel key 2 to display the hint screen. To exit the Dome Control
mode and return to live mode, press ESC or DOME.
To configure the dome controls settings, see the following sections.