
DVR User
’s Manual
18
3.5
IP Camera Setting
The distinctive hybrid solution of the DVR enables users to connect IP
camera(s) while others are analog cameras. First enter the OSD setup menu
with the administrator password and access <System Setup>
<IP Camera
Support> to select the number of IP cameras to be connected. The supported
channels of IP cameras will be from the largest numbers, for example CH16
for 16ch models.
NOTE:
The DVR must be rebooted in order to apply the change of
IP Camera Support option.
To configure setting of an IP camera, access <Camera Setup> and select the
channel with the largest number. The menu will be shown as follows.
IP Camera
1. IP Camera Select
2. IP Camera Title
3. Hostname/IP
4. Model
5. Connection Setup
6. Device Setup
7. Activated
8. Status
CH16
CH16
X.X.X.X
No
NOTE:
If the IP camera is already activated, menu
items 3 to 5 will be grayed out and cannot be accessed.
3.5.1
IP Camera Information
IP Camera Title
Access this item to enter the name of the IP camera to be shown on the
monitor.
Hostname/IP
Access this item to enter the hostname or IP address of the IP camera, for
example 192.168.1.123.
Model
Access this item to select the model of the connected IP camera.
Formatted:
Font: (Default) Arial, Bold
Содержание H.264 DVR System
Страница 1: ...H 264 DVR system H 264 DVR System User s Manual...
Страница 2: ...DVR User s Manual 1...
Страница 15: ...DVR User s Manual 14...
Страница 64: ...DVR User s Manual 63...