Optiview H.264 DVR System, Руководство пользователя, Страница: 17 / 68

DVR User
’s Manual
16
The default passwords are shown in the following table. The same
passwords are used for entering the remote viewing software.
Administrator Password User Password
1 2 3 4 4 3 2 1
NOTE: It is strongly suggested to change the
passwords to prevent unauthorized access to the unit.
3.4 System Date / Time Setting
Users can set the current date, time and other OSD parameters in Date/Time
menu (under System Setup Menu). The administrator
’s privileges are
required for entering the submenu. In OSD setup menu, select <System
Setup> and press ENTER, then select <Date/Time> to access the Date/Time
menu; the menu displays as follows.
Date/Time
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time Setup 2008/02/21
PM10:39:26
1 Row
Y/M/D
12 HR
Date First
3.4.1 Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
to select, and UP / DOWN are used to change the value in the selected field.
NOTE: The new date / time setting applies to
record new video. The date and time of previously recorded video
will not be changed.
NOTE: If time settings have to be changed in any
case, it is strongly recommended to format the HDDs to avoid
database corruption.
Date / Time Display
Users are allowed to set the time OSD displays in 1 or 2 rows. Use the UP /
DOWN keys to change the setting.