DVR Server Manual ver.5.05/rel.092507
32
2.4.2
Motion detection relay & remote client alert
【
DO Port
】
&
【
DO Description
】
Select a DO port and set its name to identify the various DO
port. It will be shown as a tip when the mouse moves closely or above the DO button in DVR Server
or NVR Client.
【
Select
Camera
】
Selects camera to be set from drop-down list.
【
Alarm Send To Network
】
Select sending alarm to network clients or not.
【
Motion Alarm Play Sound
】
Press
button to selects a ―.wav‖ sound File for a motion
alarm. If there is a motion alarm, the sound file will be played. Also, you can test it by pressing
button.
【
Video Loss Alarm Play Sound
】
Press
button to select a ―.wav‖ sound File for a video
loss alarm. If there is a video loss alarm, the sound file will be played. Also, you can test it by
pressing
button.
【
Camera Alarm DO Output
】
Selects which DO ports will be triggered by above camera
alarms.
Schedule Setup
(setting for cameras of local board cards, IP Cameras are not included.)
1.
Motion & Video Loss (Red): DVR System responds with Motion Detection and Video Loss
alarm in a specified time.
2.
Motion Alarm (Blue): DVR System only responds with Motion Detection alarm in a specified
time.
3.
Video Loss (Yellow): DVR System only responds with Video Loss alarm in a specified time.
4.
Not Check (gray): DVR System doesn‘t respond with any alarms in specified time.
Note:
Check Alarm Setup (including Motion & Video Loss, Motion Alarm and Video Loss) does not affect
the Motion Detect Record. It only applies to Motion Detect Alarm out and Motion Detect Alarm to the
network.
