DVR Server Manual ver.5.05/rel.092507
12
1.
Add mask/Delete mask
Press
button to set the area to be covered with a black mask. If there are some areas
that
you don‘t want to show, you can draw those areas with the mouse until they change to black.
You can set several cover areas. Press this button again when finish adding. This must not be used
as masking for motion detection. This is often used on ATM machine or bank vault when you do not
want the punching of PIN numbers recorded on the video for security purposes.
Press
button to delete all cover areas.
14.
DVR board work mode setup
Each DVR system supports a maximum of 8 PCs 400XHC (total channel is equal to 64) series
board, so user can set its work mode via this GUI.
For 4004HC, 4008HC, 4016HC series
board model, you can set its work mode. The
new DVR board work mode will only take effect
after rebooting DVR Server software.
