OPS70CR Simple Install Guide
7
v
Make Drain Connection
v
Make Feed Connections
Step 4
Route and connect the loose end of 1/4”
black tubing coming from Permeate Pump on
processor to a suitable drain; cut to length and
fasten to the wall and at the drain connection.
(Some locations may require an approved air
gap. Optional OptiPure Air Gap available, part
number: 164-89905)
Step 5a
Install the Feedwater Adapter (from the
installation kit) into the user-supplied 1/2”
Feedwater Supply Valve. (Do not over-tighten.)
Step 5b
Connect a piece of 3/8” green tubing to the Feed
Water Supply Valve.
Connect the other end to
the Feed Water Inlet on processor.
Step 6
Install the Tank Valve – hand tighten. Install the
3/8” Tee (tubing is in the tee) as shown above.
Ensure the Valve is CLOSED.
Step 6
Feed Water
Adapter (Supplied)
v
Install Tank Valve
and Tee Assembly
Tank Valve in
CLOSED position
