Connecting power and signal cable
Installation
1. Disassemble the metal support bracket from the unit by loosening four screws on the
bottom of unit body.
2. Tighten the metal support bracket to the ceiling of vehicle and leave a space to let the
connecting wire pass through. (Take extra care to not damage the ceiling of vehicle).
3. To install the unit to the metal support bracket:
- Connect the cables (Take care to tidy up the cables to avoid pressing up against
circuit boards);
- Install the unit using special supplied screws.
4. Screw unit into bracket.
A. Left audio input/ output (white jack)
B. Right audio input/ output (red jack)
C. Video input/ output (yellow jack)
A
C
B
FM OUTPUT
(RED) +12V
BLACKGND
TV (ANT) INPUT
(Fuse box) 250V 3A
5
