background image

Metra. The World’s Best Kits.

®

 

MetraOnline.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 12/8/20 INST107-MI1

I N S TA L L AT I O N   I N S T R U C T I O N S

107-MI1

Patent Pending

Attention!

  

Let the vehicle sit with the key 

out of the ignition for a few minutes before 
removing the factory radio. When testing the 
aftermarket equipment, ensure that all factory 
equipment is connected before cycling the  
key to ignition.

KIT FEATURES

•  Designed specifically for Pioneer modular 6.8” radios like the  
  DMH-C2550NEX and DMH-C2500NEX.  
  (Refer to the radio manufacturer for current models)
•  Blank-out included for factory radio controls removed from upper panel

KIT COMPONENTS

• A) Assembly mount • B) Radio chassis brackets • C) Display brackets • D) Display housing • E) Display Trim ring • F) Block out panel  
• G) 4mm Allen head Screws (4)

TOOLS REQUIRED

• 10mm socket set • Lots of different Torx  
• Allen head driver • Cutting tool  
• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly .............................................. 2-6
Kit Preparation .......................................................6
Kit Assembly ..........................................................7

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: LC-BMRC-01
Antenna Adapter: 40-EU10

A

C

B

G

D

E

F

Mini 

Countryman & Paceman

 

2011-2016

Visit 

MetraOnline.com

 for more detailed information about the product and up-to-date vehicle 

specific applications

(without factory NAV)

Содержание 107-MI1









Отзывы: