1.800.221.0932
|
MetraOnline.com
6
(Figure P)
(Figure A)
(Figure B)
(Figure Q)
DASH DISASSEMBLY
(CONT.)
KIT PREPARATION
15.
Push the two clips in on the back of the
speedometer and lift up carefully to
separate the chassis and speedometer,
then unplug the ribbon cable and set
speedometer aside for reassembly.
(Figures P,Q)
Continue to Kit Preparation
16.
Remove (4) Torx screws securing the
radio controls, then remove the entire
assembly from the speedometer.
(Figure A)
17.
Secure the
block out panel
to the
speedometer using (2) of the factory
screws. (Figure B)
Continue to Kit Assembly
Press shaded area to
release the speedometer