REV. 12/8/2020 INST107-MI1
7
KIT ASSEMBLY
Note:
For steps 2 and 5, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1.
Secure the
display brackets
to the
assembly mount
using (4) Allen head
screws provided. (Figure A)
Note:
The brackets have a locking pin on
them which must face outwards.
2.
Secure the
radio brackets
to the radio
chassis using (4) screws supplied with
the radio. (Figure B)
3.
Slide the
radio chassis/bracket assembly
into the dash. Secure the assembly
mount/display bracket assembly to the
radio brackets using the factory screws
(Figure C)
4.
Route the RGB display cable from the
radio chassis, through the opening in
the
assembly mount
.
5.
Secure the radio display to the
display
housing
using (4) screws supplied with
the radio. (Figure D)
6.
Clip the
display trim ring
onto the
assembly. (Figure E)
7.
Plug the RGB display cable into the
display, then slide and lock in place the
display housing
to the
display brackets
.
Use the (4) lower holes in the display
housing (Figure F)
Note:
The locking pins can be pulled
back to release the display housing.
(Figure A)
(Figure D)
(Figure B)
(Figure E)
(Figure C)
(Figure F)
