Optimus UP-127ETH, Руководство по эксплуатации

Страница: 24 / 54

UP-67ETH, UP-127ETH,
UP-247ETH, UP-367ETH
Digital power unit
UP-x7ETH version 1.1 24
6.2. Power unit configuration parameters
6.2.1. Configuration of the General tab
(1) Name
Enter a name to identify the equipment unit.
Maximum of 50 characters. In the user interface,
this name identifies the zone selection button.
(2) Type
Amplifier model.
(3) Zone Number
The zone number must not be repeated
anywhere in the installation. If the unit is
intended as a backup amplifier, the zone number
must be “0”.
(4) IP Address
IP address of the amplifier. This must coincide
with the configuration of the IP DIP switches of
the amplifier or with the address configured
through the Web connection (see section 7). It
must be a fixed IP address.
(5) Netmask
In installations where this is required. Consult
the network administrator of the installation.
(6) Gateway
In installations where this is required. Consult
the network administrator of the installation.
(7) IP Multicast
Default setting 239.5.5.5. Do not modify this
field unless the installation topology makes it
necessary. All the units with an IP connection in
the installation must have the same IP Multicast
address.
(8) Multicast Port
Default setting 5000. Do not modify this field
unless the installation topology makes it
necessary. All the units with an IP connection in
the installation must have the same Multicast
Port.
(3)
(1)
(2)
(10)
(4)
(12) (11)
(5)
(6)
(7)
(8)
(9)