Optimus UP-127ETH, Руководство по эксплуатации

Страница: 32 / 54

UP-67ETH, UP-127ETH,
UP-247ETH, UP-367ETH
Digital power unit
UP-x7ETH version 1.1 32
4. Input contact: Alarm System Activation
When the contact is activated, a message is played a
certain number of times, and then a second message
is played indefinitely.
The contact must remain activated. If it is
deactivated, the process is stopped.
This functionality is employed in alarm and
evacuation systems.
The messages used belong to the Coldfire Flash
memory.
(1) Name . Enter a name to identify the contact.
(2) Contact Status . Defines the standby status of
the contact (NO: Contact normally open; NC: Contact
normally closed).
(3) Coded Message . Enter the number
corresponding to the first of the messages that are to
be played.
(4) Number Repetitions . Number of times that the
first message will be played.
(5) Evacuation Message . Enter the number corresponding to the second of the messages that are to
be played. This message will be played while the input contact remains activated.
5. Input contact: Speaker Line Audible Frequency Measurement
When the input contact is activated, the loudspeaker
line is measured at audible frequency.
First, it is necessary to have configured the line
surveillance
.
(1) Name . Enter a name to identify the contact.
(2) Contact status . Defines the standby status of
the contact (NO: Contact normally open; NC: Contact
normally closed).
(1)
(2)
(3)
(4)
(5)
(1)
(2)