OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 100
Operating and Programming — Milling
Create Part Program Part 2
Brief instruction 808D Milling
Basic Theory
Milling slots
and spigots
The easiest way to mill a
slot is to use the SLOT2
cycle.
The cycle can be found
and parameterized via the
“Mill.” SK.
The relevant cycle can
be found using the
vertical SKs on the right.
Select “slot” using the
vertical SKs and
parameterize the cycle
according to requirement.
→
Slots
Circumf.
slots
With the “OK” SK, the values and cycle call will be
transferred to the part program as shown below.
This will perform milling at the position defined in the cycle.
actual effect
