Optimum OPTIgrind GZ20C Скачать руководство пользователя страница 22

Version 1.0.2 - 2021-5-5

22

Translation of original instruction

GZ grinding machines

EN

GZ

_GB

.f

m

1

Safety

Glossary of symbols

This part of the operating instructions

explains the meaning and use of the warning notices included in these operating instructions,

defines the intended use of the grinding machine,

points out the dangers that might arise for you or others if these instructions are not observed,

informs you about how to avoid dangers.

In addition to these operation instructions, please observe

the applicable laws and regulations,

the legal regulations for accident prevention,

the prohibition, warning and mandatory signs as well as the warning notes on the grinding machine.

Always keep this documentation close to the grinding machine.

1.1

Safety instructions (warning notes)

1.1.1

Classification of hazards

We classify the safety warnings into various levels. The table below gives an overview of the classification of
symbols (ideogram) and the warning signs for each specific danger and its (possible) consequences.

1.1.2

Other pictograms

gives further advice

calls on you to act

enumerations

Ideogram

Warning alert

Definition / consequence

DANGER!

Threatening danger that will cause serious injury or death to people.

WARNING!

A danger that might cause severe injury to the staff or can lead to death.

CAUTION!

Danger or unsafe procedure that might cause injury to people or damage to 
property.

ATTENTION!

Situation that could cause damage to the grinding machine and product and 
other types of damage.

No risk of injury to people.

INFORMATION

Application tips and other important or useful information and notes.

No dangerous or harmful consequences for people or objects.

Activation forbidden!

Warning of flammable sub-

stances!

Warning of suspended loads!

Warning risk of stumbling!

Warning tilting danger!

Warning of automatic startup!

Warning of biological hazard!

Warning of injuries to hands!

Содержание OPTIgrind GZ20C



















































Отзывы: