OPTIMUM
M A S C H I N E N - G E R M A N Y
Technical specification
Version 1.0 dated 2017-03-13
Page 48
Original operating instructions
RD4
GB
R
D
4_
GB
_2.
fm
5
Technical specification
The following information represents the dimensions and indications of weight and the manu-
facturer‘s approved machine data. The calculated envisaged life of the machine to EN ISO
13849 and EN ISO 12100 is at least 10 years with a daily operation of 8h at 220 working days
per year when keeping to the ambient conditions, proper use and keeping to the required main-
tenance intervals. Safety-related replacement parts are included in this calculation. Normal
replacement parts such as, for example, bearings, are not part of this calculation.
Electrical connection
3x400V ~50 Hz / 60Hz 5.9 KVA
Driving power spindle motor
1.5 KW
Driving power hoist motor cantilever arm
0.75 KW
Driving power cooling lubricant pump
0.1 KW
Drilling capacity in steel (S235JR) [mm]
32
Drilling capacity in cast steel [mm]
50
Tapping in steel (S235JR)
M24
Tapping in cast steel
M30
Feed speed spindle sleeve [mm/rotation]
3 stages
│
0,05
│
0,09
│
0,153
Automatic drilling depth shut-off [mm]
10 until 90
Spindle speed when connecting [ 50 Hz ]
73 - 1247 rpm
Spindle speed when connecting [ 60 Hz ]
88 - 1500 rpm
Speed steps motor + gear drive
12
Spindle seat
MT4
Spindle sleeve travel [mm]
220
Angle of rotation of cantilever
+ - 180°
Machine Weight
1120 kg
Weight including packaging
1250 kg
Floor loading
16 KN / m
2
Machine height [mm]
"Space required for the machine“ on page 51
Dimensions of machine base
Groove distance, groove size for clamping table
"T-slots, seats for clamping table“ on page 50
Maximum distance from the column surface to the centre of
the spindle [ mm ]
750
Minimum distance from the column surface to the centre of
the spindle [ mm ]
220
Column diameter [mm]
210
Drilling head travel horizontal [mm]
530
Drilling head travel vertical [mm]
580
Maximum distance from the spindle nose to the surface of
the machine base [mm]
1060
