Optimum OPTidrill RD 4 Скачать руководство пользователя страница 20

Страница: 20 / 80

OPTIMUM

M A S C H I N E N - G E R M A N Y

Delivery, interdepartmental transport, unpacking

Version 1.0 dated 2017-03-13

Page 20

Original operating instructions

RD4

_3.

Lift the Machine from the Pallet



The machine load impact is illustrated as follows.



Remove the fastening bolts that are used to fasten the machine on the pallet.



Take care with the centre of gravity of the radial drilling machine.



Lift the radial drilling machine with a crane carefully from the pallet.

Img.2-2:

Load suspension for lifting

WARNING!

Risk of toppling the radial drilling machine.

Only undo the clamping lever if the machine is anchored firmly to the base. Only remove
the support for the cantilever if the machine is anchored firmly to the base.

All clamping levers
are to be tightened

Protective mat

Содержание OPTidrill RD 4

















































































Результаты поиска

Содержание OPTidrill RD 4

Отзывы:

Бренды по названию

Популярные бренды

Optimum OPTidrill RD 4, Руководство по эксплуатации

Результаты поиска

Содержание OPTidrill RD 4

Отзывы:

Бренды по названию

Популярные бренды