Operation
Version 1.0.1 - 2020-09-07
25
Translation of original instruction
DQ14 | DQ18 | DQ22
EN
D
Q
14_
D
Q
18_
D
Q
22_
GB_4
.f
m
4.1.3 Control panel
Push button ON
The push button "ON"
switches on the rotation of the drilling spindle.
Push button Off
The "push button OFF“
switches the rotation of the drilling spindle off.
Machine light switch
Switches the machine light on or off.
Rotary direction switch
Switches the rotational direction of spindle on DQ22 - 400V machine.
4.2
Switching the machine on
INFORMATION
As long as the drill chuck guard on the DQ22 is not closed, the bench drill DQ22 cannot be
started.
On the bench drill DQ14 and DQ18 there is no switch in the drill chuck guard.
Determine and adjust the position of the V-belt. Close the cover of the V-belt cover again
with the screw plug.
Set the height of drill chuck guard and close the drill chuck guard.
Switching the machine on
4.3
Switching off the machine
CAUTION!
Only press the emergency-stop button in a genuine emergency. You should not use the
emergency stop button to stop the machine during normal operation.
Actuate the push button "OFF".
Pull the plug for a longer-term standstil.
4.4
Spindle quill feed
CAUTION!
Risk of impact by the spindle sleeve lever upon completion of the drilling feed. The
return spring biases and discharges the stored energy.
Move the sleeve downward by means of the spindle sleeve lever. The sleeve is returned to
its initial position by means of the spring force.