OPTIMUM
M A S C H I N E N - G E R M A N Y
Appendix
29 / 11 / 2006
Page
19
Appendix CNC Controller III and VI ; Version 2.0.1
©
2006
GB
11
Appendix
11.1
Copyright
©
2006
This document is copyright. All derived rights are also reserved, especially those of translation,
re-impression, use of figures, broadcast, reproduction by photo-mechanical or similar means
and recording in data processing systems, whether partial or total.
The company reserves the right to make technical alterations without prior notice.
11.2
Warranty
Within the term of warranty, the company Optimum warrants for a perfect quality of its products
and will reimburse any cost for overhaul or exchange of defective parts in case of construction
errors, faults in material and/or defect of fabrication.
The term of warranty for commercial use is 6 months and for use as an amateur it is 24 months.
Condition for a warranty claim due to construction errors, faults in material and/or defects of
fabrication is:
Proof of purchase and that the instruction for use had been followed.
In order to assert the claim of warranty, you have to present a typescript original receipt of
purchase. It must comprise the complete address, date of purchase and type of designation
of the product.
The instruction for use, the corresponding device as well as the safety information are to be
observed. Damages due to operator’s mistakes may not be accepted as warranty claims.
Correct use of devices.
The products of the company Optimum had been designed and built for certain purposes.
They are listed in the operation manual.
The warranty claim are not be accepted if the operating manual is not being followed pro-
perly or if it is used for a purpose which has not been intended or with improper accessory.
Maintenance work and cleaning.
It is absolutely necessary to maintain and clean the machine in regular intervals according to
the prescriptions of the instruction for use.
By intervention of a third party, any warranty claim will expire. Maintenance work and cle-
aning are usually not part of the claim of warranty.
Original spare parts
Make sure to use only original spare parts and original accessories. This can be acquired
from authorized distributors of the machine.
When others than original parts are being used, consequential damages may occur and dan-
ger of accidents will increase. Disassembled or partially disassembled devices and devices
which are repaired with foreign parts are excluded from warranty claims.
Wearing parts
Certain components are subject to wear out by time respectively a standard wear by use in
corresponding machine.
Among these components are e.g. V-belts, ball bearing switches, main cables, gaskets and
washers, etc. These wearing parts are not part of the warranty.
11.3
RoHS , 2002/95/EC
The symbol on the product or on its packing indicates that this product complies with the
European guideline 2002/95/EC.
