OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.2.2 dated 2014-03-07
Page 15
Original operating instructions
B24H | B24HV | B28H | B28HV
GB
1.12.2 Drill chuck protection
Adjust the protective equipment to
the correct height before you start
working.
To do so, detach the clamping screw,
adjust the required height and re-
tighten the clamping screw.
A switch is integrated in the fixture of
the spindle protection which moni-
tors that the cover is closed.
INFORMATION
You cannot start the machine if the
drill chuck protection is not closed.
Img.1-5:
Drill chuck protection B24H
1.13
Individual protection gear
For certain work individual protection gear as protective equipment. This includes:
Safety helmet,
Protective goggles or face guard,
Protective gloves,
Safety shoes with steel toe caps,
Ear protection.
Before starting work, make sure that the prescribed individual protective equipment is available
in the workplace.
CAUTION!
Dirty or contaminated personnel protective equipment can cause diseases.
Clean your individual protection gear
after each use,
regularly, at least once a week.
Personal protective equipment for special works
Protect your face and eyes: Wear a safety helmet with facial protection when performing works
where your face and eyes are exposed to hazards.
Use protective gloves when handling pieces with sharp edges.
Use safety shoes when you assemble, disassemble or transport heavy components.
Clamping screw
Drill chuck protec-
tion
